Corporate Home Page
Home
Style S 321 SS
Style Q 316 SS
Style M Monel
Fittings Guide
Installation, use & Precaution
Int. offset motion
Technical Page
Pump Connectors
Rubber covered met hose
Series 5000 BPC
Sp  Hose Assemblies
Inquiries.html

Warranty

ISO 9001: 2000 Certified 3901 NE 12th Avenue . Pompano Beach, FL 33064
1800.257.2467 - In FL 954.785.3539 - Fax 954.946.3583

Intermittent Offset Motion

NOTE: The values shown in bold are applicable to non-moving bends only. For intermittent flexing, the offset motion should not exceed more than 25% of the centerline bend radius.
Centerline
Radius
in. =(R) 		Maximum Distance From Centerline = (T)
1/8" 1/4" 3/8" 1/2" 3/4" 1" 1-1/2" 2" 3" 4" 5" 6" 8" 10"
2 1-1/4 1-3/4 2-1/4 2-1/2 3-1/4 3-3/4 4-1/2 5-1/4 6-3/4 8 9-1/4 10-1/2 11-3/4 15
4 1-3/4 2-1/2 3 3-1/2 4-1/4 5 6-1/4 7-1/4 9 10-3/4 12 131/2 16 18-1/2
6 2-1/4 3-1/4 3-3/4 4-1/4 5-1/4 6-1/4 7-1/4 8-1/4 10-3/4 12-3/4 14-1/4 16 19 21-1/2
8 2-1/2 3-1/2 4-1/4 5 6 7 8-3/4 10 12-1/2 14-1/2 16-1/4 18 20-1/2 24-1/4
10 2-3/4 4 4-3/4 5-1/2 6-3/4 8 9-3/4 11-1/4 13-3/4 16 18 20 23-1/2 26-1/2
12 3 4-1/4 5-1/4 6 7-1/2 8-1/2 10-1/2 12-1/4 15 17-1/2 19-1/2 21-1/2 25-1/2 28-3/4
14 3-1/4 4-3/4 5-3/4 6-1/2 8 9-1/4 11-1/4 13-1/4 16-1/4 18-3/4 21 13-1/2 27-1/4 30-3/4
16 3-1/2 5 6 7 8-1/2 10 12-1/4 14 17-1/4 20 22-1/2 25 29 32-3/4
18 3-3/4 5-1/4 6-1/2 7-1/2 9 10-1/2 13 15 18-1/4 21-1/4 24 26 30-1/2 34
20 4 5-1/2 6-3/4 7-3/4 9-1/2 11 13-1/2 15-3/4 19-1/4 22-1/2 25 27-1/2 32-1/4 36-1/4
25 4-1/2 6-1/4 7-1/2 8-3/4 10-3/4 12-1/4 15 17-1/2 21-1/2 25 28 30-1/2 35-3/4 40
30 4-3/4 6-3/4 8-1/4 9-1/2 11-3/4 13-1/2 16-1/2 19 23-1/2 27-1/4 30-1/2 33-1/2 39 43-3/4
35 5-1/4 7-1/4 9 10-1/4 12-1/2 14-1/2 18 20-3/4 26-1/4 29-1/2 32-3/4 36 4 47
40 5-1/2 7-3/4 9-1/2 11 13-1/2 15-1/2 19 22 27 31-1/4 35 38-1/2 44-3/4 50
45 6 8-1/4 10 11-3/4 14-1/4 16-1/2 20-3/4 23-1/2 28-1/2 33-1/4 37 41 47-1/2 53
50 6-1/4 8-3/4 10-3/4 12-1/4 15 17-1/2 21-1/2 24-3/4 30 35 39 43 50 56
60 6-3/4 9-1/2 11-3/4 13-1/2 16-1/2 19 23-1/4 27 33 38-1/4 43 47 54-1/2 61
70 7-1/4 10-1/4 12-3/4 14-3/4 17-3/4 20-1/2 25-1/4 29 35-1/2 41-1/2 46 51 58-3/4 65
80 7-3/4 11 13-1/2 15-1/2 19 22 27 31 38 44 49-1/2 54 62-3/4 70
90 8-1/4 11-3/4 14-1/4 16-1/2 20-1/4 23-1/2 28-1/2 33 40-1/2 46-3/4 52 57-1/4 66-1/4 74-1/4
100 8-3/4 12-1/4 15 17-1/2 21-1/4 24-1/2 30-1/2 35 42-1/2 49-1/4 55 60-1/2 69-3/4 78-1//4
110 9-1/4 13 15-3/4 18-1/4 22-1/2 25-3/4 31-3/4 36-1/2 44-3/4 51-1/2 58 63-1/4 73-1/4 82
120 9-1/2 13-1/2 16-1/2 19 23-1/4 27 33 38-1/4 46-3/4 54 60-1/2 66 76-1/2 85-1/2
130 10 14 17-1/4 20 24-1/4 28 34-3/4 39-3/4 48-1/2 56 62 68-3/4 79-1/2 89

ASSEMBLY LENGTH / O.A.L.
After the hose is selected for the application, the lie length and overall length of the assembly must be determined. After the live length has been determined, the overall length (O.A.L.) is calculated by adding the dimensions for the selected end fittings.